Archive for April, 2010

Service Intervals for High Mileage Vehicles in San Diego Ca

Friday, April 30th, 2010

Nowadays, everyone in San Diego, Ca is paying more at the gas pump. For some families in the greater San Diego area, it adds up to several hundred dollars every month. That’s got to come out of the budget somewhere. Throughout North America, people are putting off buying a new car. They plan on keeping their old vehicle for a year or two longer than before.

Even now, 2/3 of the personal vehicles on our local San Diego, Ca roads have over 75,000 miles on them. The average age of vehicles is over nine years. And most people in San Diego can’t afford to be stranded or inconvenienced by a break down. So following a regular maintenance schedule, like our personal diet and exercise plans, is actually critical to preserving your investment.

Knowing what to do for a higher-mileage vehicle can be challenging because many owners’ manuals don’t publish service intervals after 60,000 miles. It just means that you need to be better at keeping records and planning your preventive maintenance.

You can start by figuring that services with a recommended interval should still be performed on that interval, even after you’re past the tables in your service manual. For example, a service might be recommended every 15,000 miles. Well, just keep doing it every 15,000 miles for as long as you have your car.

Now higher mileage engines operate under more stress. Some experts suggest that the severe service schedule is more appropriate and that routine service should be performed at shorter intervals. Check with your owners’ manual or service advisor at FTS Auto Repair to see if the severe service schedule is right for your vehicle.

And keeping up with your full-service oil change schedule is important for a couple of reasons. First, older engines have had more time to build up oil sludge. Skipping an oil change here and there can really compound the problem for your Imports.

The second benefit is that your other fluids are routinely checked and topped off. Power steering fluid, brake fluid, coolant and transmission fluid can be kept at optimal levels even though the older seals and gaskets are leaking more than when they were new.

And speaking of older seals and gaskets: they start to dry-out and become more brittle with age. You may want to consider using high mileage formulation oil and fluids. These products contain special additives to condition seals and gaskets to keep them from leaking. The high mileage formulations cost more than standard products, but they are well worth it in terms of preventing serious repair bills down the road.

Older vehicles in the San Diego, Ca area need repairs and replacements that newer ones don’t. Things like timing belts, radiator hoses, suspension work, anti-lock brakes, air bags, water pumps, alternators and batteries. That may seem like a lot of stuff to have done, but it works out to be cheaper than new car payments.

With a high-mileage vehicle, a couple of relationships will become pretty important. The first is with your service advisor at FTS Auto Repair. You need someone you trust to take care of your car and be mindful of your needs. Ask for help to develop a plan to keep your vehicle road-worthy that works within your budget, and for the San Diego, Ca area driving conditions.

The next relationship is with your vehicle itself. We’re not talking about naming your car or tucking it in at night. We just mean – pay attention and get to know your vehicle. Notice unusual sounds, smells, vibrations, etc. Then you can describe the changes to your service advisor at FTS Auto Repair and head off problems. We can’t do anything about the price of gas, but we can properly maintain Old Faithful to keep it safely and economically on the local San Diego, Ca roads.

Take a look at the attached automotive tips video from AutoNetTV

.

Share

Budgeting for Maintenance In San Diego Ca

Tuesday, April 20th, 2010

Life’s full of surprises in San Diego Ca, some of which cost money. A leaky roof, a broken tooth, or an unexpected car repair. FTS Auto Repair of San Diego Ca and AutoNetTV have done some research on how we can budget for proper vehicle care.

Everyone in San Diego Ca does our best to budget for scheduled vehicle maintenance. What’s hard is unexpected repairs. The truth is that our vehicles can stay on the road longer than ever before with proper maintenance. That’s because of improved vehicle design and manufacturing quality. But some of those same improvements also lead to higher repairs costs.

Let’s take the fuel pump. Previous generations were often stranded by the side of the road by vapor lock. This occurred when the gas vaporized between the gas tank and the fuel pump. Fuel just stopped flowing.

You had to sit and wait until the car would start again. To alleviate the problem, fuel pumps are now located inside the gas tank. This is a great solution, but when the fuel pump fails, it’s a much more expensive proposition to replace it.

Sealed wheel bearing assemblies are another example. These wheel bearings can’t be serviced – you just have to replace the entire assembly when it starts to fail. That costs several times as much as service on non-sealed bearings.

So we all benefit in San Diego Ca from design improvements, but we need to plan for repairs down the road.

There’s a tool that can be found on Edmunds.com that you can use to prepare your service and repair budget.

Let’s suppose you have a 2003 Toyota Camry – a very popular car in San Diego Ca. It’s now paid for and you’d like to keep it running for the next three years. You can go to Edmunds’ True Cost to Own calculator and enter your vehicle’s data. The calculator will provide estimates of what it’ll cost to service and repair your vehicle over the next five years. The estimate is based on where you live in or near San Diego Ca, manufacturers’ recommendations and repair experience for your particular model.

Of course these are just estimates – there’s no way to predict what’ll actually happen to the car in your driveway, but it’s a good starting point.

The calculator also has estimates for depreciation, financing, insurance, taxes and fuel costs.

Let’s focus on maintenance and repair. This table shows that the average monthly cost of maintenance and repairs is eighty-three dollars. That may sound like a lot, but compare it to a new car payment.

Budgeting for Maintenance

So if you set aside eighty-three dollars a month, you’d go a long ways towards taking care of routine maintenance and being prepared for the unexpected repairs that arise.

Of course, you can’t predict when something will go wrong or what it’ll cost, but at least you have a reasonable target to shoot for.

Some people around San Diego Ca are afraid of what can go wrong with their older car so they buy a new one. That’s fine if you really want a new car, but if you properly maintain your older vehicle, you’ll save a lot of money on new car payments and insurance. It just makes good economic sense.

Get with your San Diego Ca service advisor at FTS Auto Repair and work out a plan for keeping your vehicle on the road.

You can visit FTS Auto Repair at 3727 Convoy St in San Diego, Ca 92111 or just give us a call at 858-279-7724.

Share

How Your Check Engine Light Works

Tuesday, April 13th, 2010

Have you ever had an experience like this in San Diego Ca? You drive through the one of those automatic car washes. When you get to the end, where the dryer is blowing, your check engine light started flashing!

You fear the worst, but within a block or two, the light stopped flashing, but stayed on. By the next day, the light was off.

You wonder; “What was going on?” Well, it’s actually a good lesson in how the Check Engine light works.

Your air intake system has a sensor that measures how much air is coming through it. When you went under the high-speed dryer, all that air was blasting past the sensor. Your engine computer was saying, there shouldn’t be that much air when the engine is just idling. Something’s wrong. Whatever’s wrong could cause some serious engine damage.

Warning, warning! It flashes the check engine light, to alert you to take immediate action.

It stopped flashing because once you were out from under the dryer, the airflow returned to normal. Now the engine control computer says the danger is past, but I’m still concerned, I’ll keep this light on for now.

Then the Check Engine Light goes off in a day or two.

The condition never did recur, so the computer says whatever it was, it’s gone now. The danger is past, I’ll turn that light off.

Now a flashing check engine light is serious. You need to get it into our San Diego Ca shop as soon as possible. But if it stops flashing, so you have time to see if the problem will clear itself or if you need to get it checked. How does the computer know when to clear itself?

Think of it this way. The engine control computer is the brain that can make adjustments to manage the engine. Things like alter the air to fuel mix, spark advance, and so on. The computer relies on a series of sensors to get the information it needs to make decisions on what to do.

The computer knows what readings are in a normal range for various conditions. Get out of range, and it logs a trouble code and lights up the check engine warning.

The computer will then try to make adjustments if it can. If the computer can’t compensate for the problem, the check engine light stays on.

The computer logs a trouble code. Some people think the code will tell the technician exactly what’s wrong?

Actually, the code will tell the technician what sensor reading is out of parameters. It can’t really tell you why, because there could be any number of causes.

Let’s say you’re feeling hot. You get your heat sensor out – a thermometer – put it under our tongue and in a minute or two you learn that you have a fever of 104 degrees.

You know your symptom – a fever – but you don’t know what’s causing it. Is it the flu, a sinus infection or appendicitis?

You need more information than just that one sensor reading. But it does give you a place to start and narrows down the possible problems.

There are reports on the internet telling you that you can just go down to an auto parts store and get them to read your trouble code or buy a cheap scan tool to do it yourself.

There are two problems with that. First, the computer stores some trouble codes in short term memory, and some in permanent memory. Each manufacturer’s computer stores generic trouble codes, but they also store codes that are specific to their brand.

A cheap, generic scan tool, like you can buy or that the auto parts store uses, doesn’t have the ability to retrieve long-term storage or manufacturer specific codes. Your San Diego Ca service center has spent a lot of money on high-end scan tools and software to do a deep retrieval of information from your engine control computer.

The second problem is that once you’ve got the information, do you know what to do with it? For example, a very common trouble code comes up when the reading on the oxygen sensor is out of whack.

So the common solution is for the auto parts store to sell you a new oxygen sensor, which are not cheap, and send you off on your way. Now your oxygen sensor may indeed have been bad and needed replacing. But the error code could have come from any of a dozen of other problems.

How do you know the right solution? Back to the fever analogy, do you need surgery or an aspirin? Leave it to the pros at FTS Auto Repair. Give us a call at 858-279-7724 and let us help you resolve your check engine light issue.

Share

Coolant Antifreeze Service

Tuesday, April 6th, 2010

You may know that most automotive failures are tire related, but do you know the second most common cause for vehicle failure? Nope, it’s not teenagers. It is the coolant system. But, if you take good care of your coolant system, it will take good care of you.

A car’s engine creates a lot of heat – so much heat, that if it is not properly cooled, the engine can lock up, resulting in massive damage and repair bills. But when everything is working right, your engine operates at the proper temperature and all is well. Without antifreeze in your cooling system, the water could freeze and cause engine damage. This could be very expensive, not to mention inconvenient.

The right mix of water and antifreeze protects the engine against damage from freezing and overheating. Antifreeze also protects the coolant system against corrosion that could cause the system to fail. The thing to remember is this: coolant system failure is very common, but it is also very easy to prevent. Service technicians at FTS Auto Repair can check the manufacturers’ recommendations, and tell you when the coolant needs to be changed. See ftsauto.com. They can also perform a coolant system service.

Even the best antifreeze cannot completely protect the coolant system from harmful deposits forever. The anti-corrosion additives are used up over time, so the coolant must be replaced. A coolant service cleans out the system and replaces the old fluid with fresh coolant. A coolant system service is a low-cost way to protect against major engine repairs down the road. Prevention is the key. Be sure to watch out for the two main warning signs: if your temperature gauge is in the “hot” zone or if you get a message warning you to check your coolant. If you take a look under the hood, you will see the coolant overflow bottle. You can see there are lines that indicate the proper level of coolant … if your engine is cold – or if it is hot.

You can add water or antifreeze to that bottle yourself, but be careful. First, you never want to open the radiator pressure cap. The steam could severely burn you. Second, try to get to your Terrasanta or Carmel Valley auto service center immediately if your coolant is low. If that is not possible, follow the directions in your owner’s manual. Third, remember that you need a proper mixture of water and antifreeze, or you will damage your engine. If you make an emergency addition to your cooling system, follow-up with your service center where they can make necessary corrections. Fourth, not all cars use the same type of antifreeze. You will need to check your owner’s manual to make sure you use the right kind. Mixing antifreeze types or using the wrong kind of antifreeze may void the manufacturers warranty on your cooling system. If you’re not sure, ask your San Diego area service technician for guidance.

Share

Maintenance Free Myth

Friday, April 2nd, 2010

Sometimes we hear people say, “What’s up with all this maintenance stuff? Modern cars just don’t break down.” While it is true that today’s cars and trucks are extremely reliable, they are also becoming increasingly complicated and use more exotic materials than ever before. All that complexity demands higher tolerances for everything. For example, most folks don’t realize how high tech automotive fluids have become. Fluids like, engine oil, transmission fluid, coolant and brake fluid.

Did you know that a modern engine would not run for more than a few months using motor oil formulas from 30 years ago? Today’s automotive fluids contain a much higher percentage of additives to protect your vehicle’s components from premature wear and corrosion. Time and miles march on for all of our cars. Please don’t think we’re using scare tactics to get you to take care of your maintenance – but here are some personal stories from AutoNetTV staff members to emphasize the importance of getting things done when they are due. Names are withheld to avoid embarrassment to those who should know better. Even though they should know better, it usually comes down to real life: time and budget. But they are tales of a stitch in time saves nine.

The first comes from a staffer who bought a used pick-up truck for his son. The oil was clean and all the fluids were topped off. A short time later, the truck overheated on the highway and shut down. The repair shop diagnosed the problem: the radiator pan was corroded and dumped the coolant. Even though the coolant level was correct, it was clear that the coolant had never been exchanged – just topped off from time to time. While this kept the engine cool, all of the anti-corrosion additives had worn out; the coolant became acidic and ate through the radiator pan. The cost: hundred of dollars and four days in the shop. This demonstrates the need to get your coolant exchanged on schedule.

Another story involves the true cost of skipping an annual inspection. Our staffer took his SUV in for the Ca safety inspection to renew his registration. At the inspection station, he learned that the law had changed and that his newer rig only required an inspection every two years. He was very happy to save the $45 bucks. The problem was, his rear brake pads were very worn. Two months later, it was bad enough that he could hear the grind – over the radio, DVD player and the kids. He took it in to get the bad news. Both of the rear brake rotors were damaged. The left one could be resurfaced. The right had to be replaced. So saving a few bucks on his safety inspection turned into an extra $500 over what brake pad replacement would have been. Moral of the story: don’t skip your annual inspections. The irony is that many San Diego service centers would have done a brake inspection for free.

Next: a teenage daughter and a curb. Daddy’s little princess smacked a curb when she turned into a shopping center and popped the tire. The problem came when Dad didn’t get an alignment. The impact was hard enough to ruin the tire – so it was hard enough wreck the alignment. But instead of an alignment after the first tire, Papa ended up buying a second tire a few months later – and then an alignment.

Situation: son and wife with cars from the same manufacturer with essentially the same engine. Our staffer checked the son’s maintenance schedule and saw that it needed a timing belt replacement at 90,000 miles/145,000 km. He had it done – it cost several hundred dollars. His wife’s car had about 60,000 miles/97,000 km, so it should be ok for a while. Right? Wrong. The problem was that the wife had the turbo charged version. Its belt was scheduled for replacement at 60,000 mi/97,000 km. At 63,000 mi./101,000 km, the belt snapped on the interstate. The valves all crashed down into the cylinders at high speed and the entire head was shredded and had to be replaced. The cost: several thousand dollars. Does he wish he had checked the maintenance schedule? You bet he does – every time he passes a big-screen TV.

We’re talking about taking care of little things before they become big things. And when you take care of the little things, your car runs better and is more economical to operate. Remember to save those maintenance records. It’ll show potential buyers that you’ve taken care of your vehicle and it will help you get a better price. Or when you buy a used car, check those records. If there aren’t any, assume that the maintenance hasn’t been done and take it to your Terrasanta or Carmel Valley service center for an inspection. Take care of unperformed maintenance sooner rather than later.

Share